| Bandwidth | DSO4254B: 250MHz; DSO4204B: 200MHz; DSO4104B: 100MHz; DSO4084B: 80MHz |
| Sample Rate Range | 1GS/s |
| Waveform Interpolation | (sin x)/x |
| Record Length | Maximum 64K samples per single-channel; |
| SEC/DIV Range | 2ns/div~100s/div |
| Sample Rate and Delay Time Accuracy | ±50ppm |
| AD Converter | 8-bit resolution, each channel sampled simultaneously |
| VOLTS/DIV Range | 500μV/div to 10V/div at input BNC |
| Position Range | 500μV/div~20mV/div, ±400mV |
| Selectable Analog Bandwidth Limit, typical | 20MHz |
| Low Frequency Response (-3db) | ≤10Hz at BNC |
| Rise Time at BNC, typical | DSO4254B: DSO4254B; DSO4204B: DSO4204B; DSO4104B: DSO4104B; DSO4084B: DSO4084B |
| <1.4ns | DSO4254B: ≤1.8ns; DSO4204B: ＜3.5ns; DSO4104B: ≤4.4ns |
| DC Gain Accuracy | ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div |
| Acquisition Modes | Normal, Peak Detect, Average and HR |
| Acquisition Rate, typical | Up to 2000 waveforms per second per channel (Normal acquisition mode, no measurement) |
| Single Sequence | DSO4254B: Acquisition Mode; DSO4204B: Acquisition Stop Time |
| Mode | Auto, Normal |
| Level | DSO4254B: CH1~CH4; DSO4204B: ±4 divisions from center of screen |
| EXT | 0~3.3V |
| Holdoff Range | 20ns ~ 10s |
| Trigger Level Accuracy | DSO4254B: CH1~CH4; DSO4204B: 0.2div × volts/div within ±4 divisions from center of screen |
| Slope | Rising, Falling, Rising&Falling |
| Source | CH1~CH4/EXT |
| Polarity | Positive, Negative |
| Condition(When) | <, >, ≠ , = |
| Width Range | 8ns ~ 10s |
| Resolution | 8ns |
| Signal Standard | NTSC, PAL |
| Sou rce | CH1~CH4 |
| Sync | ScanLine, LinrNum, OddField, EvenField and AllField |
| Time Range | 8ns ~ 10s |
| Pattern | 0: Lower level; 1: High level; |
| Source(RX/TX) | CH1~CH4 |
| Data format | Hex |
| Data Length | 1 byte |
| Parity Check | None, Odd, Even |
| Idle Level | High, Low |
| Baud Rate(Selectable) | 110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s |
| Baud Rate (Custom) | 300bit/s~334000bit/s |
HantekHTK-DSO4004BSERIES
Hantek DSO4004B Series
4CH oscilloscope, 80-250MHz bandwidth, minimum measurement range 500μV /div，1GS/s sample rate，advanced digital trigger system, high trigger sensitivity, low trigger jitter，high resolution 7 inch 64K color TFT （800*480）
Price on Request
1