Test Accessories
Probes, current clamps, attenuators and adapters for test and measurement.
The HK-50 is a through type impedance adapter (1W, 1GHz) with BNC connectors.
6-Way Universal Breakout Leads Connector size: micro: 0.6 mm small: 1.5 mm medium: 2.3 mm large: 2.8 mm
AC/DC Current Clamp, 20kHz Bandwidth, 1mV/10mA, 65A; It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.
AC/DC Current Clamp, 400Hz Bandwidth, 1mV/10mA, 650A; It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.
The multimeter/oscilloscope can directly measure the DC current of no more than 800A and the AC current of no more than 500A through the AC/DC current probe, and the measurement frequency is up to 5KHz.
This acupuncture probe is a back pinning, piercing and repairable probe; Contents: 5pcs complete acupuncture probes, 2pcs screws, and 20pcs replacement needles.
Auto ignition probe is a kind of inductive capacitance sensor, it must match with an oscilloscope.
Test lead of a male BNC connector to (2) 4mm connectors.
The BNC to 4 mm adapter connects two 4 mm "banana" plugs to a BNC socket.
1m BNC male to BNC male cable; Frequency range: DC ~ 1GHz; Nominal impedance: 50Ω; Coaxial cable.
This breakout lead is easy to take voltage readings from numerous sensors in vehicle engine compartment.
Simple accessory that allow you to take accurate secondary ignition measurements on Coil-on-Plug (COP) ignition systems.
The T3100 probe is designed as a strong, flexible and reliable part for the oscilloscope according to the human body function.
HT20COP coil-on plug and signal probe can catch the ignition waveform of automobile engine easily.
HT25COP coil-on plug and signal probe can catch the ignition waveform of automobile engine easily.
This board is factory installed on oscilloscopes as an optional interface and should require no futher connections to be made to it.
Length: 85 mm Height: 38 mm Depth: 16.5 mm Clamping limit: 30 mm Contents: 1pc X Red Clip 1pc X Black Clip
Double gripper with two square output pins; Narrow nose configuration is ideal for side-by-side stacking; Dual leads and application versatility; Easy to use spring loaded design; Assorted colours.
11.4mm multimeter banana plug and socket, terminal test hole and connector.
The multimeter probes offer a quick and easy solution, where a permanent connection is not required.
Meter probe with standard plug (4mm), suitable for universal.
External multimeter socket Size: 11.4mm Contents: 1pc X red socket 1pc X black socket
Integral injection molding makes the usage more flexible and the oscilloscope able to adapt more testing situations.