All Products
Bandwidth: 20MHz-200MHz; Sample Rate: 250MSa/s; Excellent industrial design-the same anodised aluminium casing as iPad, which is not only beautiful and tasteful but also greatly enhanced the hardness of aluminum alloy surface, and has go...
Cost-effective economy oscilloscope, 150MHz Bandwidth, 1GSa/s, 8M memory depth; with 1CH 25MHz waveform generator, support arbitrary waveform output; 14 kinds of trigger modes, standard with 5 kinds of serial protocol triggers and decode...
Six in one: Oscilloscope/Recorder/DMM/ Spectrum Analyzer/Frequency Counter/Arbitrary Waveform generator.
HDL2500 + series oscillating DC electronic loads can display voltage and current waveforms in real time, and support waveform recording, storage and playback, so that signal changes can be clearly seen.
6 ½ digit resolution;30 k/s high-speed sampling frequency, which makes it easy to capture transient signals; Front and rear multimeter input,measure a key switch; statistic analysis; histogram and run chart display function; Double displ...
The HDP3323 Multi-Output Programmable Linear DC Power Supplies are based on Hantek's long-standing expertise in power supply development and production.
The world's most affordable precision DC energy analyzer: ±15 V, ±3 A, 0.1 nA resolution, 200 kHz bandwidth and 1 MSa/s simultaneous 24-bit current & voltage measurement.
USB voltage datalogger with display, 0–48 V DC, 31,320 data points, programmable alarms with crocodile-clip cables included.
USB temperature & humidity datalogger for HACCP environments, -40 to +70 °C, 32,000 records with plug-and-play USB interface.
Dry ice datalogger with internal PT1000 sensor, -80 to +70 °C, EN12830-compliant for air transport of vaccines and biological samples.
High-precision USB logger with external PT1000 probe, -40 to +140 °C, IP68 stainless-steel body for ovens, autoclaves and thermal validation.
Single-use USB temperature logger, -30 to +70 °C, automatic PDF report generation for HACCP and cold chain monitoring.
USB temperature logger with internal sensor, -40 to +70 °C, 32,000 records, ±0.5 °C accuracy for cold chain and storage.
USB datalogger with Type K thermocouple input, -200 to +1370 °C, 32,000 records for industrial furnaces and food processing.
An all-new handheld oscilloscope-Hantek2000 series, it continues the compact and lightweight concept but with a new generation of 3 in 1 multifunction tester: oscilloscope, signal source and multimeter; A small volume of the non-profit g...
The HK-50 is a through type impedance adapter (1W, 1GHz) with BNC connectors.
6-Way Universal Breakout Leads Connector size: micro: 0.6 mm small: 1.5 mm medium: 2.3 mm large: 2.8 mm
20MHz Bandwidth; 48MSa/s Sample Rate; 16 Channels Logic Analyzer; Excellent industrial design-the same anodised aluminium casing as iPad, which is not only beautiful and tasteful but also greatly enhanced the hardness of aluminum alloy s...
AC/DC Current Clamp, 20kHz Bandwidth, 1mV/10mA, 65A; It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.
AC/DC Current Clamp, 400Hz Bandwidth, 1mV/10mA, 650A; It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.
The multimeter/oscilloscope can directly measure the DC current of no more than 800A and the AC current of no more than 500A through the AC/DC current probe, and the measurement frequency is up to 5KHz.
This acupuncture probe is a back pinning, piercing and repairable probe; Contents: 5pcs complete acupuncture probes, 2pcs screws, and 20pcs replacement needles.
Real-time presentation of the output waveform, can visualize the output distortion and noise caused by inductive and capacitive loads.
Auto ignition probe is a kind of inductive capacitance sensor, it must match with an oscilloscope.
Test lead of a male BNC connector to (2) 4mm connectors.
HT2018B\C series storage battery tester is a test equipment specialized for activated lead-acid battery.It can get storage battery working condition through testing starting process,charging process and electrical load process,then analy...
The BNC to 4 mm adapter connects two 4 mm "banana" plugs to a BNC socket.
1m BNC male to BNC male cable; Frequency range: DC ~ 1GHz; Nominal impedance: 50Ω; Coaxial cable.
This breakout lead is easy to take voltage readings from numerous sensors in vehicle engine compartment.
Simple accessory that allow you to take accurate secondary ignition measurements on Coil-on-Plug (COP) ignition systems.
Up to 120 channels per system; Scan rates up to 450 channels/second; Support 6 1/2 digit sampling accuracy; Voltage (AC/DC), current (AC/DC), resistance (2-wire and 4-wire system), strain, frequency period, capacitance, temperature (10 k...
Up to 360 channels per system; Scan rates up to 450 channels/second; Support 6 1/2 digit sampling accuracy; Voltage (AC/DC), current (AC/DC), resistance (2-wire and 4-wire system), strain, frequency period, capacitance, temperature (10 k...
Up to 600 channels per system; Scan rates up to 450 channels/second; Support 6 1/2 digit sampling accuracy; Voltage (AC/DC), current (AC/DC), resistance (2-wire and 4-wire system), strain, frequency period, capacitance, temperature (10 k...
2.7GHz Frequency Counter, PC USB Function/Arbitrary Waveform Generator; 14bits D/A resolution; USB2.0 interface, no external power source required, easy to use.
25Mz Arbitrary waveform output (sine wave up to 75 Mz); 200 MSa/s of sample rate, 12 bits of vertical resolution; USB interface, plug and play, no need external power supply, compact and portable.
The waveform capture rate of DPO6000/MPO6000 Fluorescent oscilloscope is up to 400,000 FPS.It has 256 grade color and color temperature display.Standard equipped with up to 16 kinds of trigger functions, 5 kinds of serial decoding functi...
The waveform capture rate of DPO6000/MPO6000 Fluorescent oscilloscope is up to 400,000 FPS.It has 256 grade color and color temperature display.Standard equipped with up to 16 kinds of trigger functions, 5 kinds of serial decoding functi...
10.1 inch multi-touch capacitive screen, 256 level waveform gray scale and color temperature display, 500MHz bandwidth, 2GSa/s sampling rate, 2G memory depth, 500.000wfms/s waveform capture rate; With a 25MHz waveform generator, supporti...
10.1 inch multi-touch capacitive screen, 256 level waveform gray scale and color temperature display,1GHz bandwidth,8GSa/s sampling rate, 2G memory depth, 600.000wfms/s waveform capture rate; Built in two 200MHz waveform generator, suppo...
Five in one: Oscilloscope/Recorder/DMM/FFT Spectrum Analyzer/Frequency Counter.
Isolated level: 1000V CATII, 600V CATIII; 60MHz-200MHz Bandwidth Oscilloscope; 1GSa/s sample rate,1M Memory Depth, and 6000 Counts DMM with analog bargraph; 5.6 inch TFT Color LCD Display, high resolution(640*480).
Cost-effective economy oscilloscope, 150MHz Bandwidth, 1GSa/s, 8M memory depth; with 1CH 25MHz waveform generator, support arbitrary waveform output; 14 kinds of trigger modes, standard with 5 kinds of serial protocol triggers and decode...
Cost-effective economy oscilloscope, 150MHz Bandwidth, 1GSa/s, 8M memory depth; with 1CH 25MHz waveform generator, support arbitrary waveform output; 14 kinds of trigger modes, standard with 5 kinds of serial protocol triggers and decode...
The DSO2D20 series digital oscilloscope has comprehensive functions and outstanding performance, with a sampling rate of 2GSa/s and a maximum bandwidth of 500MHz across the entire range.
60MHz bandwidth; 2 or 4 channels oscilloscope; Models with many extra functions like arb.
4CH Oscilloscope 16CH Logic Analyzer 1CH Function/Arb.
4 Channels, 10K-16M Memory Depth, Frenquency Counter, FFT, USB 2.0 interface plug and play; LAN optional.
4 Channels, 10K-16M Memory Depth, Frenquency Counter, FFT, USB 2.0 interface plug and play; LAN optional.
4 Channels, 10K-16M Memory Depth, Frenquency Counter, FFT, USB 2.0 interface plug and play; LAN optional.
4CH oscilloscope, 80-250MHz bandwidth, minimum measurement range 500μV /div，1GS/s sample rate，advanced digital trigger system, high trigger sensitivity, low trigger jitter，high resolution 7 inch 64K color TFT （800*480）
4CH oscilloscope, with 1CH Arbitary/function waveform generator, independent keys of oscilloscope and waveform generator which is easy to operate at the same time..
Bandwidth:60-200MHz; Real Time Sample Rate: 1GSa/s; Large (7.0-inch) color display,WVGA(800x480); Record length up to 1M; Multiple automatic measurements; Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
Bandwidth:70-200MHz; 1GSa/s Real Time Sample Rate; Record length up to 40K; Multiple automatic measurements; Large (7.0-inch) color display, WVGA(800x480); Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
8 channels pressure test analyzer is mainly used for the performance test of main pump,sub-pump,door pump,quick release valve,4 loops and etc.
Support setting slow start time to avoid the power-on shock to different loads.
Real-time presentation of the output waveform, can visualize the output distortion and noise caused by inductive and capacitive loads.
The HBT3000 series 6 1/2 bit high-resolution internal resistance tester is a battery internal resistance tester with high precision and fast measurement characteristics.
The HBT4000 series 6 1/2 bit high-resolution internal resistance tester is a battery internal resistance tester with high precision and fast measurement characteristics.
HDG3000B sets arbitrary waveform generator, pulse generator, function generator, harmonic generator, frequency meter 5 functions in one.
HDG3000C sets arbitrary waveform generator, pulse generator, function generator, harmonic generator, frequency meter 5 functions in one.
HDG6000B series integrates multi-function like arbitrary waveform generator, pulse generator, 16-bit word generator, 7-digit cymometer and function generator; It can generate and output stable, accurate and low distortion signals; Built-...
5 1/2 reading multimeter with 1 μV high resolution; 30 kS/s high-speed sampling frequency, which makes it easy to capture transient signals; Two sets of input interfaces front and rear, which provides convenience to arrange wires; Standa...
The maximum range of DCA is 50A, the maximum range of DCV is 2000V; 6 ½ digit read multimeter, 0.1 μV high resolution; 30 k/s high speed acquisition, which is conducive to capturing transient signals; two sets of input ports are front an...
7½-digit high-accuracy multimeter, with a current resolution of 0.1pA and a voltage resolution of 10nV; 50k/s fast reading speed, conducive to capturing transient signals; Front and rear 2 sets of multimeter test terminals,convenient for...
7½-digit high-accuracy voltmeter, with a voltage resolution of 10nV; 50k/s fast reading speed, conducive to capturing transient signals; Front and rear 2 sets of voltmeter test terminals,convenient for testing system cabling; Standard ba...
Four-digit display voltage and current, resolution up to 10mV/1mA; Standard USB quick charge function, support a variety of quick charge protocols; Storage functions up to 10 groups; AC input voltage 230/115V switch, universal; Fully iso...
High performance four-channel programmable linear DC regulated power supply; 4.3-inch color display, real-time display voltage/current/power value and waveform, which makes the output status and trend clear at a glance; 1mV/1mA high reso...
High-power adjustable DC power supply, with a single unit power ranging from 600W to 15kW, and output voltage ranging from 0 to 1500V, output current ranging from 0 to 500A, which can be flexibly selected; the product is small in size an...
The HNFP series probe set contains 2 high-frequency probes specialised for testing electric fields (E), which are near-field probes mainly applied to find sources of electric field interference.
The HNFP series of near-field probes cover the 9KHz to 3GHz frequency range and are ideal for use in the development of cost-effective EMI troubleshooting solutions, which can be employed to address a wide range of EMI problems.
The HBT4000 series 6 1/2 bit high-resolution internal resistance tester is a battery internal resistance tester with high precision and fast measurement characteristics, with a measurement voltage range of up to 2100V.
The HBT3000 series 6 1/2 bit high-resolution internal resistance tester is a battery internal resistance tester with high precision and fast measurement characteristics, with a measurement voltage range of up to 2000V.
The T3100 probe is designed as a strong, flexible and reliable part for the oscilloscope according to the human body function.
6 ½ digit resolution;30 k/s high-speed sampling frequency, which makes it easy to capture transient signals; Measures current and voltage at the same time; histogram and run chart display function; 300A/1000A current range; 4.3 inch 64K ...
12-bit vertical resolution, 500MHz bandwidth, 2.5GSa/s sampling rate; Waveform capture rate is higher than 1.1 million waveforms per second, quickly capture instantaneous signals; Set 8 independent instruments in one, highly integrated f...
12-bit vertical resolution, 3GHz bandwidth, 10GSa/s sampling rate; Waveform capture rate is higher than 1.1 million waveforms per second, quickly capture instantaneous signals; Set 8 independent instruments in one, highly integrated func...
Frequency range :9KHz~1.6GHz； Optimal sensitivity: -161dBm； RBW:10Hz to 1MHz.
Frequency range :9KHz~3.2GHz； Optimal sensitivity: -161dBm； RBW:10Hz to 1MHz.
HT20COP coil-on plug and signal probe can catch the ignition waveform of automobile engine easily.
HT25COP coil-on plug and signal probe can catch the ignition waveform of automobile engine easily.
Automatic identification of component types; Maximum test signal frequency: 100 kHz; AC test signal level: 100 - 2000 mVrms; DC bias voltage: 0 - 1500 mV; Supports DC resistance and electrolytic capacitor measurement; Basic accuracy: 0.1...
One channel, 0-30V output; 0-3A/0-5A Current output; Two LEDS Display output current and voltage.
Three channels, 0-30V output; 0-3A/0-5A Current output; Two LEDS Display output current and voltage.
One channel, 0-30V output; 0-3A/0-5A Current output; LCD display to show regulated voltage and current.
Two channels, 0-30V output; 0-3A/0-5A Current output; LCD display to show regulated voltage and current.
Three channels, 0-30V output; 0-3A Current output; LCD display to show voltage and current.
HT3323/HT3325 is a new generation DC stable power supply we launched,which can be program controlled.It has a USB program control interface and can output arbitrary voltage or current value;uses LED to display the working state of power;...
The HT360 series portable hardness tester is a device that uses the principle of Richter hardness measurement to measure the hardness of metals, can measure various metal materials including steel and cast steel, alloy tool steel, stainl...
HT824 multifunctional process calibrator has high accuracy, high stability, can be widely used in site calibration of industry instruments and equipment in laboratory.
HTM200 series handheld multi-channel temperature detector is controlled by high-performance 32-bit ARM microprocessor, which can collect multi-channel temperature data in real time at the same time, support list display and bar graph dis...
iPad/Windows Oscilloscope, Multi-touch Operation.WIFI Communication (USB Communication), WIFI Direct Connection/ Router Connection.Build-in Lithium Battery with 4 hours endurance, no need of External Power.
This board is factory installed on oscilloscopes as an optional interface and should require no futher connections to be made to it.
Length: 85 mm Height: 38 mm Depth: 16.5 mm Clamping limit: 30 mm Contents: 1pc X Red Clip 1pc X Black Clip
The HNFP series of near-field probes cover the 9KHz to 3GHz frequency range and can be used to build cost-effective EMI troubleshooting solutions to solve a wide range of EMI problems.
Double gripper with two square output pins; Narrow nose configuration is ideal for side-by-side stacking; Dual leads and application versatility; Easy to use spring loaded design; Assorted colours.
Mixed Signal Oscilloscope; Bandwidth:60-200MHz; Real Time Sample Rate:1GSa/s;Record Length: 1M; Large (7.0-inch) color display,WVGA(800x480); 16 channels Logic Analyzer,500MSa/s sample rate; Power Trigger mode: edge/pulse width/line sele...
11.4mm multimeter banana plug and socket, terminal test hole and connector.
The multimeter probes offer a quick and easy solution, where a permanent connection is not required.
Meter probe with standard plug (4mm), suitable for universal.
External multimeter socket Size: 11.4mm Contents: 1pc X red socket 1pc X black socket
Integral injection molding makes the usage more flexible and the oscilloscope able to adapt more testing situations.
HNFPA-1 preamplifier with our HNFP series of near-field probes, mainly for the test of the weak signal amplification, the frequency range of 9kHz-3GHz; HNFPA-1 gain of about 30dB, can greatly improve the sensitivity of the system test.
The new generation of TO1000 series multi-functional full touch screen oscilloscope has a thin body, light weight and is easy to carry；Unique hanging design, hands-free, anti falling and anti-seismic, sturdy and durable; It integrates os...
Hantek1832C/Hantek1833C handheld LCR Meter is a portable handheld measuring instrument to measure the parameters of the component such as inductance, capacitance, resistance and so on.small volume, powered by 5V lithium battery, it can m...
An all-new handheld oscilloscope-Hantek2000 series, it continues the compact and lightweight concept but with a new generation of 4 in 1 multifunction tester: Automotive Diagnostic, oscilloscope, signal source and multimeter; A small vol...
Safe electrical isolation; Long time record voltage, current, resistance and capacitance etc.
Safe electrical isolation; Long time record voltage, current, resistance and capacitance etc.
Safe electrical isolation; Long time record voltage, current, resistance and capacitance etc.
Safe electrical isolation; Long time record voltage, current, resistance and capacitance etc.
Safe electrical isolation; Long time record voltage, current, resistance and capacitance etc.
Safe electrical isolation; Long time record voltage, current, resistance and capacitance etc.
Hantek4032L combines the function of logic analyzer,bus analyzer, and logic probe etc.
The performance of this model could even better than the performance of benchtop oscilloscope.
4 analog channels, waveform capture rate is 400,000FPS.1GSa/s real-time sampling rate,250MHz bandwidth.
Standard equipped over 80 types of automotive measurement function (Ignition Action/The Sensor/Bus Diagnosis/Performer/Startup&Charge); USB 2.0 interface plug and play, and no need extra power supply; Support tablet PC; Support WIN10/ WI...